Talent.com

Process safety engineer Jobs in Edmonton ab

Last updated: 5 days ago
Process Engineer

Process Engineer

StantecEdmonton, AB
Full-time
Show moreLast updated: 7 days ago
Intermediate Process Engineer

Intermediate Process Engineer

KleinfelderEdmonton, AB
Full-time
Show moreLast updated: 7 days ago
Process Engineer

Process Engineer

TWDCalgary or Edmonton, AB, Canada
CA$85,000.00–CA$90,000.00 yearly
Show moreLast updated: 30+ days ago
Intermediate Process Engineer

Intermediate Process Engineer

WSPEdmonton, AB
Full-time
Show moreLast updated: 7 days ago
Senior Process Engineer

Senior Process Engineer

CB CanadaSherwood Park, Alberta, Canada
CA$150,000.00–CA$200,000.00 yearly
Show moreLast updated: 30+ days ago
Process Engineer-in-Training

Process Engineer-in-Training

Associated EngineeringEdmonton, AB
CA$76,110.00–CA$95,130.00 yearly
Full-time +1
Show moreLast updated: 30+ days ago
Engineer-in-Training, Process Control

Engineer-in-Training, Process Control

Inter PipelineStrathcona County, AB, CA
Full-time
Show moreLast updated: 5 days ago
Senior Research Scientist I - Process Safety and Development

Senior Research Scientist I - Process Safety and Development

Gilead Alberta ULCEdmonton, Alberta, Canada
CA$70,000.00 yearly
Full-time
Show moreLast updated: 30+ days ago
Specialist, Process Safety Management

Specialist, Process Safety Management

Plains Midstream Canada ULCSherwood Park, AB
CA$22.00–CA$23.00 hourly
Full-time
Show moreLast updated: 30+ days ago
Safety - Technical Safety Engineer or Specialist II

Safety - Technical Safety Engineer or Specialist II

PetroplanAlberta
serp_jobs.job_card.currency_minsalary_currency_maxsalary_dayly
Show moreLast updated: 30+ days ago
Process Safety Engineer

Process Safety Engineer

Scout TalentEdmonton, Alberta, Canada
Full-time
Show moreLast updated: 30+ days ago
  • Promoted
Advanced Process Control Engineer

Advanced Process Control Engineer

DexcentAlberta, Canada
Full-time
Show moreLast updated: 13 days ago
Senior Process Engineer

Senior Process Engineer

WorleyEdmonton, AB, CAN
CA$118,800.00 yearly
Show moreLast updated: 30+ days ago
  • Promoted
Senior Process Safety Engineer

Senior Process Safety Engineer

Randstad CanadaEdmonton, Alberta, CA
Permanent
Quick Apply
Show moreLast updated: 25 days ago
Food Process Engineer (Intermediate)

Food Process Engineer (Intermediate)

LaporteEdmonton, AB, CA
Permanent
Show moreLast updated: 25 days ago
Senior Process Engineer

Senior Process Engineer

WoodEdmonton, AB, Canada
CA$118,800.00 yearly
Full-time
Show moreLast updated: 30+ days ago
Environmental Process Engineer

Environmental Process Engineer

EnglobeEdmonton, Canada
CA$500,000.00 yearly
Show moreLast updated: 30+ days ago
Safety Engineer

Safety Engineer

LHR GlobalEdmonton, Alberta, CA
CA$48,500.00 yearly
Full-time
Show moreLast updated: 25 days ago
Senior Research Scientist I - Process Safety and Development

Senior Research Scientist I - Process Safety and Development

Gilead SciencesEdmonton, Alberta, Canada
CA$174,400.00–CA$261,600.00 yearly
Show moreLast updated: 30+ days ago
Process EIT

Process EIT

TWD Technologies Ltd.Calgary, Edmonton, AB, CA
CA$76,110.00–CA$95,130.00 yearly
Full-time
Quick Apply
Show moreLast updated: 30+ days ago
Process Engineer

Process Engineer

StantecEdmonton, AB
7 days ago
Job type
  • Full-time
Job description

Process Engineer - ( 24000493 )

Description

At Stantec, we approach every water and natural resource project we undertake-whether at the local, regional, or watershed level- thoughtfully, and execute it with excellence across all project phases. We partner with our clients to design fit-for-purpose solutions that address their communities' unique needs throughout the water infrastructure lifecycle. Our experts lead their fields and guide our work with scientific rigor, an innovative spirit, and a vision for growth. We're a place where you can apply your passion and collaborate with top talent on work that's critical to our clients, our communities, and the industry at large.

Your Opportunity

Stantec is seeking a Process Engineer having experience in the energy industry with keen interest and transferable skills to work on projects in the areas of conventional oil & gas, energy transition, renewable energy, and low-carbon initiatives.

As the Process Engineer , you will work on a variety of projects as a team member under the guidance of a Senior Process Engineer or Team Lead. Your primary role will be to evaluate, select, specify, and engineer certain processes, methodologies, or products for a project. You will perform various tasks, including simulations, calculations, and support fieldwork.

The projects that the Process Engineer will be assigned to may have complex features that will require the application of good engineering knowledge, and both critical and creative thinking. The successful candidate should have experience in any of the areas of oil and gas (upstream, midstream, or downstream), energy transition, renewable energy, and low-carbon initiatives, chemical, petrochemical, or industrial process design. The projects would comprise pre-feasibility studies, feasibility studies, FEED, and or detailed design / engineering phases of execution.

Your Key Responsibilities

Under the direction of a Senior Process Engineer or Team Lead, the Process Engineer will assist with engineering design activities for projects of various sizes and complexity. Complete the tasks as assigned by the Senior Process Engineer or Team Lead in a timely, thorough, and organized manner. Peer review of deliverables created by other process engineers may also be required.

  • Complete various tasks in a timely, thorough, and organized manner. The tasks may include, but are not limited to :
  • Development of process simulations using Aspen HYSYS including Aspen Flare Analyzer and Aspen Exchanger Design and Rating (EDR) , Process Symmetry, ProMax, and / or any other industry simulation software
  • Development of engineering drawings such as BFDs, PFDs, and P&IDs
  • Carry out process studies / analyses, and provide recommendations for new and existing installations including adequacy checks and evaluation of new and / or existing equipment
  • Process sizing calculations for equipment, lines (piping hydraulics), and instrumentation
  • Generation and documentation of simulation, study reports and calculations performed
  • Carry out PSV sizing and support ORA (overpressure risk assessment)
  • Contribute to the development of documents such as heat and material balance tables, equipment datasheets, instrumentation datasheets, line designation tables, PSV lists, cause and effect diagrams (shutdown keys), set point lists, car seal lists, process design basis / criteria, design basis memorandum, and operating / control philosophies
  • Participate in P&ID reviews, design reviews, and process safety reviews as required
  • Perform fieldwork necessary to gather data, check tie-ins and provide home-office construction and commissioning support
  • Collaborate with other Stantec peers - process team members, other engineering disciplines, and project stakeholders to deliver quality products to Stantec clients
  • Meet all requirements of the Client and Stantec Quality and Safety requirements. Ensure appropriate reference material is always utilized
  • Client interface - Establish and maintain positive client relationships. Carry out discussions and presentations, as required
  • Be familiar with applicable industry codes and regulations and ensure appropriate industry-accepted methods are used for work
  • Maintaining good standing with APEGA and compliance with the ethical obligations
  • Strengthen technical knowledge through on-the-job, informal, and formal training

Qualifications

Your Capabilities and Credentials

  • Good knowledge of process engineering design for conventional oil & gas, gas plants and liquids handling facilities, Renewable Energy - carbon capture, Hydrogen, Oil Sands and SAGD facilities, or refineries
  • Strong experience in using simulation software (Aspen - HYSYS, Process Symmetry, PROMAX, etc.)
  • Good knowledge of piping hydraulics and line sizing
  • Good experience with hydraulic software such as AFT (Fathom, Arrow, Impulse) or any other comparable facility hydraulics software
  • Reasonable experience with Aspen Flare Analyzer and Aspen Exchanger Design and Rating (EDR)
  • Familiarity or experience with hydraulic software (Synergi Pipeline Simulators - SPS) would be an asset but is not essential.
  • Sound experience with the development and checking of BFDs, PFDs, and P&IDs. The ability to read piping isometrics and piping plans would be an asset
  • Strong experience with some process calculations including equipment and PSV sizing, and a reasonable degree of skill with Microsoft Excel.
  • Organizing and checking of documentation including but not limited to P&IDs, data sheets, and reports
  • Knowledge of design standards, guidelines, and applicable legislations (Canadian, API standards, AER directives, etc.) i.e., familiarity with applicable industry codes and regulations
  • Solid understanding of project life cycle and experience in working for different project stages from concept design to detailed engineering
  • Experience in working with electronic markup software, such as Bluebeam Revu or any other equivalent software.
  • Demonstrated process improvement skills
  • Demonstrated initiative, flexibility, and adaptability
  • Strong interpersonal, analytical, and problem-solving skills
  • Strong written and excellent oral communication skills (English) and be able to clearly present and explain technical terms
  • Be an effective team contributor with the ability to work independently when required
  • Be self-motivated, eager to learn and grow and be accountable
  • Education and Experience

  • Bachelor's degree or equivalent in Chemical Engineering. About 4 - 7 years of experience.
  • Registered with APEGA (as EIT or P. Eng).
  • Typical office environment working with computers and remaining sedentary for long periods. Field work may include exposure to the elements including inclement weather.

    Hybrid working environment (In-person if office / Home)

    This description is not a comprehensive listing of activities, duties or responsibilities that may be required of the employee and other duties, responsibilities and activities may be assigned or may be changed at any time with or without notice.

    Stantec is a place where the best and brightest come to build on each other's' talents, do exciting work, and make an impact on the world around us. Join us and redefine your personal best. The experience will forever shape your future. #FeelingEnergized

    We would like to thank all candidates that apply; however, only those selected for interviews will be contacted.

    Benefits Summary : Regular full-time and part-time employees will have access to health, dental, and vision plans, a well-being program, health care spending account, wellness spending accounts, group registered retirement savings plan, employee stock purchase program, group tax-free savings account, life and accidental death & dismemberment (AD&D) insurance, short-term / long-term disability plans, emergency travel benefits, tuition reimbursement, professional membership fee coverage, and paid time off.

    Temporary / casual employees will have access to group registered retirement savings plan, employee stock purchase program, and group tax-free savings account.

    The benefits information listed above may not apply to union positions because benefits for such positions are governed by applicable collective bargaining agreements.

    Primary Location : Canada-Alberta-Calgary

    Other Locations : Canada-Alberta-Edmonton

    Organization : BC-1109 Energy-CA Alberta

    Employee Status : Regular

    Job Level : Individual Contributor

    Travel : Yes, 10 % of the Time

    Schedule : Full-time

    Job Posting : Nov 20, 2024, 4 : 15 : 59 AM

    Req ID : 24000493

    additional

    Stantec provides equal employment opportunities to all qualified employees and applicants for future and current employment and prohibit discrimination on the grounds of race, color, religion, sex, national origin, age, marital status, genetic information, disability, protected veteran status, sexual orientation, gender identity or gender expression. We prohibit discrimination in decisions concerning recruitment, hiring, referral, promotion, compensation, fringe benefits, job training, terminations or any other condition of employment. Stantec is in compliance with local, state and federal laws and regulations and ensures equitable opportunities in all aspects of employment. EEO including Disability / Protected Veterans