-the installation of tooling (injection, IBM, ISBM and extrusion) into moulding machines as per scheduling requirements.
MAJOR RESPONSIBILITIES:
-responsible for receiving QA part approval when the set-up is complete and ready for production.
-responsible for cleaning mould components of the out-going mould before it is put on the racks for service.
-must ensure a complete line clearance procedure has been completed as per SOP before turning machine over to production.
-responsible for visual inspection of both out-going and in-bound tool during the set-up process.
-responsible for completing and all necessary documentation related to the mould change.
-responsible for installation of any automation required to run the mould being installed as well as returning auxiliary equipment no longer required to the appropriate storage area.
-must ensure the machine and surrounding area is cleaned thoroughly before turning the machine and mould over to production.
-help in mould recovery process as required or as idle time permits.
LIMITATIONS AND DISCLAIMER (Non-Canada)
The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position.
All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees.
This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws.
Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an “at-will” basis.
Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status.
Silgan is a drug-free workplace.
LIMITATIONS AND DISCLAIMER – Canada
The above job description is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position.
All job requirements are subject to possible modification to accommodate individuals with disabilities. Silgan endeavors to provide accommodations to individuals with disabilities to perform their essential job duties as long as the accommodation does not pose an undue hardship on the company’s operations and does not pose a direct threat of substantial harm to the employee or others.
This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor.
Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Employment is always subject to the Silgan’s rights as employer, including the right to end employment in accordance with Provincial Law.
Silgan is an equal opportunity employer. We consider applicants for all positions without regard to any ground protected under Provincial human rights laws.
Silgan is a drug-free workplace.
Set up Process Technician • Scarborough, Ontario
The MAC Self Perform Technician is responsible for delivering on-demand services relating to furniture systems and furniture repairs for multiple facilities.The MAC Self Perform Technician is respo... Show more
We are currently looking for a.In this role, you will be part of the.Our Snow & Ice division consists of approximately 350 employees across sites in St-Valérien-de-Milton, Ayer's Cliff, Laval, Cale... Show more
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest ... Show more
Job Title: Full‑time Outpost Technician (Willowbrook).Take on a new challenge and apply your troubleshooting and repair expertise in a new cutting‑edge field.You’ll work alongside dynamic and suppo... Show more
We are a small company that values respect and integrity within our company, as well as with our customers and vendors.We are a very well-established company that provides greenhouse solutions for ... Show more
Currently, in order to fulfill the rapidly increase product demands, a new production facility has been setup in Markham, ON.The Process Technician we are looking for needs to setup and operate the... Show more
Apotex is a Canadian-based global health company.We improve everyday access to affordable, innovative medicines and health products for millions of people worldwide, with a broad portfolio of gener... Show more
Drive productivity as an Automotive Manufacturing Process Technician at TI Automotive.Engage in monitoring, troubleshooting, and optimizing injection molding processes to enhance quality and effici... Show more
A Mould set up Technician is responsible for installing, setting, and adjusting molds and related auxiliary equipment according to production needs and SOPs.Key responsibilities include installing ... Show more
About Us (and Our Exciting Future).Menasha Corporation is all about possibilities.Our two businesses, Menasha Packaging and ORBIS Corporation, are leaders in their industries, providing corrugated ... Show more
Glenn’s Edibles is hiring Production Technicians to support our fast growing gummy production facility.This is hands on work in a clean, organized, fast paced environment.We’re looking for reliable... Show more
We are looking for a reliable and hands-on Maintenance Associate to support general maintenance and facility setup in warehouse and office environments.The ideal candidate will be comfortable using... Show more
Shop Technician to join our growing team in Mississauga.The primary purpose of this position is to perform the installation, assembly, and servicing of truck mounted systems, including but not limi... Show more
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do.Our employees are unified in a shared dedication to our customers’ mission and quest ... Show more
Current work authorization for Canada is required for all openings.You will be working on a 100% remote schedule and this role requires travel within North America 70% of the time.We are looking fo... Show more
We are hiring a Process Technician for SMT and PCB assembly in Markham, ON.This role offers competitive pay at $19-$21 per hour with flexible shift patterns.In this position, you will oversee the s... Show more
Installs, services, adjusts and repairs coin-operated slot machines, currency changers, video arcade games and currency and coin-handling equipment located in the shipboard Casino by performing the... Show more
Utility TechnicianBewerbenlocations: Toronto, ONtime type: Full timeposted on: Heute ausgeschriebenjob requisition id: JR20280Bring your energy to Aggreko as **Utility Technician** based in... Show more
We are a leading, and growing, North American manufacturer of baked goods for over 30 years.If you're looking for a company that will provide you with opportunities for career growth and developmen... Show more
A sustainable hydration company located in Aurora is seeking a full-time Maintenance Technician with expertise in Tetra Pak machines.The successful candidate will maintain and troubleshoot plant eq... Show more
