P&C Design Engineer 22235

Job Description

Work Assignment Name : P&C Design - E3

Location of Services : Burnaby - in office 2 / 3 days per week

Contract Duration : 12 months

Work Assignment Overview : Work with BC Hydro P&C Engineers on Station P&C Projects

Max T4 Rate : $80.80 /

Max INC Rate : $66.78 /

General Description

The E3 Engineer is a fully qualified and accredited engineering professional who applies theoretical and practical knowledge to provide engineering design estimating planning and quality management services for low to medium complexity projects and / or operations safely with quality within budget and on time.

Experience and Role Accountabilities

A minimum four (4) years of in a relevant engineering field or equivalent.

Develop safe engineering solutions by using initiative and judgement to perform activities such as developing designs analyzing and resolving problems and interpreting engineering specifications on low to medium complexity assignments for projects and / or operations.

Assist project or operations management to meet safety cost quality and time objectives by performing activities such as proposing changes in plans and estimated costs recommending payment for work completed by contractors preparing progress reports coordinating work schedules and other similar tasks.

Participate in BC Hydros engineering practice by conducting independent studies and analysis exercising judgment in selecting and interpreting information recommending safe engineering designs and making typical decisions related to standard methods and designs so that BC Hydros engineering standards are maintained.

Perform periodic tasks independently which may include on-site construction quality control and monitoring to ensure design compliance.

Engage with BC Hydros senior engineering team where engineering problems are difficult complex or unusual to support BC Hydros management of engineering risk.

Important notes :

Prior to commencement on assignment the selected candidate must have their own sole practitioner or the use of their firms Permit to Practice with EGBC.

BC Registrants provided to BC Hydro through this assignment shall work under BC Hydros Professional Practice Management Plan Quality Management Pillar. The Registrant shall apply their own or their firms Permit to Practice Number to work that is Sealed by the Registrant. Retention and preservation of all project documentation produced by the Registrant during their contract with BC Hydro will be retained by BC Hydro to satisfy EGBC Bylaws.

Education and Skills

University graduate in applied science or engineering

Registered Professional Engineer (.) or Professional Geoscientist (.) with Engineers & Geoscientists BC or with another jurisdiction and eligible for registration as such with Engineers & Geoscientists BC

BC Hydro uses a Digital Sign and Seal Technology. You may be required to subscribe to a digital seal technology service offered by Notarius

Familiarity with CAD systems and drawing standardsAbility to use standard industry design / analysis software

Intermediate MS Office skills (Word Excel and PowerPoint)

Intermediate English skills for professional environment written and spoken

Role SpecialtyP&C Design - Transmission - Stations

Role Specialty Description :

Additional Experience and Role Accountabilities

This role requires experience with the design of protection and control systems in electrical utility substations with operating voltages from 12kV to 500kV and demonstrated experience working with utility P&C design solutions and protection & control systems in an electric utility environment.

The work is focused on the protection and control systems used in transmission stations with operating voltages from 12kV to 500kV.

Prepare project documentation and deliverables in accordance with BC Hydro project and Engineering Design Practices (i.e. evaluation reports specifications proposals estimates design basis calculations hazard logs test plans).

Prepare design work packages including scope duration and level of effort estimates.

Prepare signed / sealed engineering deliverables as a Professional of Record (PoR) in accordance with Engineers and Geoscientists BC (EGBC) and BC Hydro design practices.

Provide technical assistance and construction support in the field and undertake field reviews as required by EGBC.

Prepare detailed designs and documentation for protection and control systems in substations with operating voltages from 12 kV to 500 kV in accordance with BC Hydro and industry standards and practices.

Prepare detailed design packages (equipment layouts single line diagrams ac / dc schematics diagrams cable schedules wiring diagrams material lists external connections) required to install or modify equipment including interfacing to the existing station systems ready to issue and archive in the BC Hydro Drawing file system.

Specify and procure materials panel assemblies and other related equipment.

Prepare reports detailing condition assessment investigations of facility equipment and systems evaluation and analysis of the investigation and recommendations to address any deficiencies found.

Prepare commissioning test plans and summary of requirements documentation.

Providing technical guidance and review of designs prepared by others following established practices.

Provide training for end-users and peers on the theory and operational use of the installed or modified equipment / systems.

Successful candidate will be required to :

• do traveling to sites and locations within BC including remote locations.
• maintain in good standing their Drivers License Type Class 5.

Key Skills

Anti Money Laundering,English Speaking,Data Entry,Food,Investigation,Adobe Indesign

Employment Type : Contract

Experience : years

Vacancy : 1

Hourly Salary Salary : 50 - 80