Electrical & Instrumentation Inspector Contract

SGS is currently looking for Quality Assurance Inspectors (Electrical and Instrumentation) to work on a contract basis.

The E&I Inspectors will be set up as contractors and be contacted when work is available. It is not full-time hour work. It could be short term contract (a few days) to longer terms (a few months).

Scope of work:

• The scope of work includes verifying electrical systems instrumentation and control systems against design specifications industry standards and client requirements to ensure quality safety and compliance. Key tasks involve inspecting installations witnessing tests such as loop checks and calibration reviewing documentation (ITPs certificates) documenting non-conformances and generating detailed inspection reports.
• Inspect and verify that all electrical and instrumentation components and installations meet project specifications client requirements and relevant industry codes and standards (e.g. IEC ISA IEEE API).
• Examine electrical systems including wiring cable trays grounding and lighting as well as instrumentation components like transmitters valves and control panels.
• Oversee and witness critical pre-commissioning and commissioning activities such as loop checks insulation resistance tests continuity tests and the calibration of instruments.
• Review and verify quality documents such as Inspection and Test Plans (ITPs) Method Statements Calibration Certificates and As-Built documentation.
• Identify potential issues or defects by raising Non-Conformance Reports (NCRs) tracking them and assisting in root cause analysis and corrective actions.
• Ensure that all inspection and testing activities are performed safely and in strict adherence to site-specific HSE requirements.

Prepare and submit detailed inspection reports outlining findings recommendations for corrective action and the overall status of the E&I work

Qualifications :

• Electrical and/or Instrumentation Journeyman Red Seal is required.
• Minimum of 5 years of experience with inspection work.
• The ideal candidate will have a minimum of 5 years of industry experience.(Mainly Oil and Gas/Power and Utilities)
• Must be able to demonstrate knowledge of Electrical & Instrumentation (E&I) inspections.
• Pay range is $45 to $55/hour depending on experience $0.70/km.
• Work schedule: 8-10 hour a day. / Ad hoc as required by the client.
• If inspection site is beyond round trip 300 kms from Inspector place of residence then per diem could be applicable subject to client approval.

Additional Information :

SGS is an Equal Opportunity Employer and as such we recruit hire train and promote persons in all job classifications without regard to race color religion sex national origin disability age marital status sexual orientation gender identity or expression and Indigenous status or any other characteristics protected by law.

To perform this job successfully an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge skills and/or abilities required.

This job description should not be construed as an exhaustive statement of duties responsibilities or requirements but a general description of the job. Nothing contained herein restricts the companys rights to assign or reassign duties and responsibilities to this job at any time.

Accommodations are available on request for qualified candidates during each stage of the recruitment process.

Please note that candidates applying for Canadian job openings should be authorized to work in Canada.

Remote Work :

No

Employment Type :

Contract

Key Skills
Food Safety,Business Management,Defense,ABAP,Games,Automobile
Experience: years
Vacancy: 1