MAINTENANCE MECHANIC FACILITIES OPS

City of Toronto
Toronto, ON, CA
$28-$32 an hour (estimated)
Permanent
Full-time

Responsibilities

  • Perform skilled and semi-skilled tasks in the installation, maintenance, repair of gas equipment (under 400,000 BTU) and other related HVAC Equipment.
  • Ensure all Government and Canadian Gas Association codes, standard and regulations are followed during the installation, maintenance and selection of gas related equipment and systems.
  • Perform purging, isolating, venting and monitoring gas lines, vessels, gas systems and equipment for the purpose of maintenance, repair, replacement where Gas Fitter 2 Certificate is applicable, by using gas detection equipment, ventilation fans, warning signs, lock-out devices, etc.
  • Perform general shop work including the use of oxy-acetylene and electric welding and other tools.
  • Perform duties while operating high reach equipment also may be required to operate forklifts and hoisting devices.
  • Travel to work location using City vehicle and perform daily vehicle inspection log.
  • Communicate effectively verbally and in writing including the preparation of daily / weekly work reports, details of work completed, data logging, etc.
  • Utilizes and maintain a variety of hand and power tools and other City owned equipment.
  • Works with various instruments, gauges and test equipment for the testing, calibrating, maintaining and operating of gas equipment systems.

Key Qualifications :

Your application must describe your qualifications as they relate to :

Must possess and maintain a Gas Fitter G2 Certificate, issued in accordance with Ontario Regulation 826 / 82, made under the Energy Act.

Considerable experience as a Gas Fitter.

Experience in general shop and plumbing practices and the operation of tools required for construction and maintenance of gas systems.

Must possess and be able to maintain a valid Province of Ontario, Class "G" Driver's Licence and must qualify for the City's equipment operating permits and requirements

You must also have :

Extensive knowledge and familiarity with the use, installation and detection of gas equipment, conditions, systems, procedures, safety requirements, materials, components, etc.

Knowledge of electricity in its single and 3-phase forms, as applied to motors, solenoid valves, etc.

Thorough knowledge and experience in the installation, repair and testing of mechanical equipment, such as : pumps, compressors, flame arrestors, chlorinators, and associated equipment, with an understanding of the benefits of preventive and predictive maintenance to achieve reliable and economical operation of the facilities.

Must be familiar the properties / characteristics of Natural Gas, Propane, Acetylene, Ozone gases, liquid and gaseous Chlorine and other chemicals, as well as the Ontario Gas Utilization Code, the Ministry of the Environment and Chlorine Institute recommendations ad publications, the Ontario Boiler and Pressure Vessels Act and all other related regulatory codes that apply to this work.

Ability to read, and interpret blueprints, sketches and drawings and maintain accurate records and to communicate effectively verbally and in writing.

Must be physically capable of performing required duties.

Must be familiar with the Occupational Health and Safety Act and the regulations that apply to this work.

With the appropriate safety precautions, must be able to tolerate duty, noisy, heights and odorous conditions. Must be able to work in and have knowledge of confined space entry and regulations.

Must be available to work shift / weekend / overtime / on call duty.

30+ days ago
Related jobs
City of Toronto
Toronto, Ontario

Thorough knowledge and experience in the installation, repair and testing of mechanical equipment, such as: pumps, compressors, flame arrestors, chlorinators, and associated equipment, with an understanding of the benefits of preventive and predictive maintenance to achieve reliable and economical o...

Polytainers
Toronto, Ontario

Performs preventative maintenance procedures for Facilities equipment, Building, and Grounds as assigned by Facilities Supervisor and Facilities Engineer. Facilities Maintenance Mechanic – Night Shift (11:30PM to 7:30AM). The Facilities Maintenance Mechanic’s duties / responsibilities are as follows...

Promoted
Xylem
Toronto, Ontario

Must have customer service experience. ...

TEEMA
Albany, NY, CA

Commercial Kitchen Equipment Service Technician. Residence is required within a 30-minute radius of the service area. You will be responsible for troubleshooting, diagnosing, and repairing commercial cooking, refrigeration, ware-washing, and specialty food service equipment. Growth opportunities, in...

Veolia
Toronto, Ontario

Valid 442A Electrician Licence and/or a Valid 433A Millwright Licence. ...

Alpine Building Maintenance
Toronto, Ontario

Toronto, ON, Canada Req #815 Wednesday, October 9, 2024 .Full Time, permanent (The role will require flexibility in shift times, as interaction with night cleaning crew will also be required.Toronto, ONT and Surrounding Areas....

Waterford Search Selection Advisory
Vaughan, Ontario

Our client, a world leader in the supply of products for the manufacturing of corrugated plastic pipe require a Maintenance Technician. Troubleshooting, testing, repairing preventative maintenance and servicing CNC equipment related to all in house manufacturing. Managing on-site installation, repai...

Myrowich Staffing Agency
Mississauga, Ontario

If you have the experience and a passion for automotive repair, we want to hear from you!. Stay up to date with the latest automotive technology and repair techniques. Strong understanding of automotive systems and components. ...

Mac-Weld Machining
Ontario, Canada

The Maintenance Millwright is responsible for assembling, installing and adjusting equipment, machinery. Fabricate parts required during overhaul, maintenance or set-up. Perform routine maintenance work on machinery. Conduct basic maintenance repairs of facility including plumbing and some electrica...

Sunwing
Etobicoke, Ontario

Communicate through the Aircraft Maintenance Certifying Engineer to the Supervisor the status of their assigned aircraft throughout their shift. Aircraft Maintenance Engineers (AME’s). Carry-out all scheduled and non-scheduled maintenance as assigned by the Supervisor or Aircraft Maintenance Duty Ma...