About the Role
We are seeking a General Operator to join our Pangea Screen team. The successful candidate will be responsible for supporting the Direct Wire Wrap operations, while also supporting various aspects around the manufacturing shop including deburr, punch slot, shroud weld, shroud installation, and end ring operations.
Position Details :
- Shift : Weekday Graveyard and Weekend Day shift
- Location : Calgary, AB (NE Area)
Duties and Responsibilities
Direct Wire Wrap
Health and Safety : The equipment used in this process may interfere with electronic medical implants. DO NOT APPLY if you have an electronic medical implant.
Secure pipes on Direct Wire Wrap machine, select the correct gauge and shape, and ensure wire cuts are accurate.Select correct Wrap Program on the machine according to the customer order, conduct wrap process, and monitor the wrap coil and sizing.Monitor the entire wrap process from start to end to ensure wrap coil does not twist or move out of correct spacing.Conduct Gap Checks at each regular interval to ensure they are conforming and accurate.Perform in-process inspection of machined components with company provided Quality Control measuring equipment.Utilize Lucid system to track quality data on current products.Deburr
Conduct accurate measurements, confirm inside and outside dimensions and ensure raw material matches within the Lucid system.Charge out deburr head and operate the deburr machine.Inspect the ID of pipe to confirm the deburr head is performing its function.Remove any broken drill heads from pipe and ensure the pipe is free of deburr.Shroud Weld
Monitor the shroud welding machine.Perform and ensure each shroud passes in process quality inspection.Adjust when required to keep product in tolerance.Log all data in the Lucid quality system.Confirm each shroud is marked for traceability purposes.Shroud Installation
Position shroud and pipe on the shroud pull conveyor system.Pull shroud onto pipe using the hydraulic drive.Confirm the shroud and pipe have been fitted with end rings and the shroud crimped with shroud crimper in proper location.End Ring Weld
Ensure proper end rings are on the pipe and in position.Follow the Pre, Post and Weld procedures that have been created.Conduct checks to guarantee assigned equipment is operating correctly and in good working order.Other Duties
Ensure all data is accurately entered into the Lucid system, logging data to confirm the procedure has been completed and achieved its results.Conduct checks to guarantee assigned equipment is operating correctly and in good working order.Liaise with the Quality Control Team, Shipping / Receiving, and other employees, and supervisors.Maintain the assigned work area clean and free from hazards.Adhere to health and safety protocols including always wearing proper Personal Protective Equipment (PPE).Required Abilities, Knowledge, Experience
Basic computer skills and ability to navigate through Lucid System.Demonstrated ability to work to exact drawing and order specifications (an asset).Ability to read and follow instruction from order on Lucid System.Team player with strong verbal and written communication skills.Demonstrates strong attention to detail in order to create highest quality level products.Experience using various hand tools and equipment including forklift and hand cutting tools for steel plates (an asset).Knowledge or experience utilizing Quality Control equipment including casing drift, calipers, feeler gauge / microscope, and shroud bend test machine (an asset).Experience using measuring equipment (an asset).Possesses effective time management skills and efficiency.All applicants are thanked for their interest.
Steelhaus Technologies Inc. is an equal opportunity employer.
Steelhaus Technologies Inc. complies with the Personal Information Protection Act (PIPA). By forwarding your resume to Steelhaus you are consenting to the collection and use of your personal information for this job competition. Your information will be kept strictly confidential.
#J-18808-Ljbffr