drywall installer

Work site environment

• Dusty
• Noisy

Work setting

• Commercial
• Residential
• Various locations

Tasks

• Read blueprints, drawings and specifications to determine work requirements
• Apply successive coats of compound and sand seams and joints
• Apply, level and smooth coats of plaster
• Clean and prepare surfaces
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Finish corners and angles and create decorative designs in finish coat, if required
• Measure, cut, fit and install drywall sheets
• Mix plaster ingredients to desired consistency
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Tape over joints using taping machine and embed tape in compound
• Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
• Install corner beads and wire mesh around beams to which plaster is to be applied
• Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
• Utilize laser alignment system

Work conditions and physical capabilities

• Bending, crouching, kneeling
• Hand-eye co-ordination
• Handling heavy loads
• Large workload
• Manual dexterity
• Physically demanding
• Repetitive tasks
• Standing for extended periods
• Tight deadlines

Weight handling

• Up to 23 kg (50 lbs)

Personal suitability

• Dependability
• Flexibility
• Judgement
• Reliability
• Team player
• Work Term : Permanent
• Work Language : English
• Hours : 40 to 44 hours per week