Apprenti Maçon F/H

Eiffage Route contribue à l’amélioration du réseau français, des voies communales aux tracés autoroutiers, qu’il s’agisse de conception, de construction ou d’entretien.

Experte en aménagement urbain, Eiffage Route participe également à la réalisation de projets portuaires, aéroportuaires, industriels et commerciaux.

MISSIONSCORE HOURS : InstallationParticipate in building site rollout and overall securityCreating the routes required for masonry works Building site completionForward the equipment needed for the building site : choose the right tools and equipment, check that they work properly.

Anticipate equipment requirements and request the corresponding supplies.Use the building site’s small equipment and machines.

Quality, Prevention, Security and EnvironmentProduce reporting for various managers regarding the completed construction works and difficulties experiencedEnsure the quality and security of the works within the set time frameManage environmental constraints and ensure the full adoption of the corresponding measures Building site withdrawalMaintain clear access to the building site and facilities, maintain the building site’s signage.

Clean up the work area and stow away building site equipmentEnsure recovery of unused materials upon building site completion SPECIFIC ACTIVITIES AER MASON Concrete placing installation and preparationWork with installer to review distribution and three-dimensional positioning of the guide wire and plates in relation to the construction to be completedImplement reinforcements, wires and water passages by respecting the standards (covering, welding, tying, spacing, etc.

Carry out formworkMasonry Carry out the finishing masonry on the cast construction workCarry out manual masonry on extruded constructions (safety barrier lowering, boat passage)Perform standard concrete placing vibrationWork with exposed aggregate concreteSmooth and finish concrete slabs (troweling + screeding + flushing) EXTRUDED CONCRETE INSTALLER Installation Identify the work area with the Team LeaderPosition the installation plates along the entire length of the pouring areaPosition an installation pin at the beginning and end of the pouring area To achieve this, the installation is sunk into the groundUnwind the installation stringWork in pairs / twos to review set-up and three-dimensional positioning of the string and the plates in relation to the construction to be completedAs work progresses, identify other concrete placing areasGradually stow the plates in the truck before placing them in a plate box Masonry Complete masonry work during concrete placingAssist Machine Operator in arranging mold sets EXTERNAL WORKS MASON Pipe layingAdjust the excavation floor, put the networks in place (pvc, cast iron, sandstone).

Lay the various service pipes : connections to inspection chambers, breech-pieces, pressure taps, miscellaneous installations.

Set up dry networks (telecom, electrical) MasonryMake mortar and concrete mixes and choose aggregates and doses; help to lay roadsides / curbstones.

Lay or assist with the laying of roadsides / curbstones. Align and elevate concrete blocks.Assemble prefabricated parts (for observation wells, retaining walls).

Dig trickle channels and carry out finishing work (patching, coating) ConcreteCarry out standard formwork.Make and implement traditional, simple or complex formwork.

Assemble simple reinforcements. CoatingsCarry out exposed aggregate concrete surfaces.Lay paving stones and concrete slabs.

JOB REQUIREMENTS Experience required : Industrial or traditional masonry, Joinery Various authorizations may be required depending on specialization JOB ENVIRONMENTReporting line : Team Leader or Site SupervisorBuilding Site Team Internal relations : Building Site Team, Quality Prevention Safety and Environmental (QPSE) Coordinator, Machine / Vehicle Operators External relations : Co- and sub-contractors, Delivery employees, Temporary employees

Formation :

Etudiant en formation Bac pro à Bac+2 (CAP) dans le domaine de la Maçonnerie ou de la Construction de Route, vous recherchez une alternance.

Compétences :

Vous avez le goût du terrain, une grande rigueur et un esprit d’équipe. Vous êtes intéressé par la découverte des métiers de la Route et disposez d’un bon relationnel.

Vous souhaitez vous investir au sein d'un grand groupe capable de vous offrir de réelles opportunités de carrière. Alors rejoignez-nous !