drywall taper

Tasks

• Apply successive coats of compound and sand seams and joints
• Apply, level and smooth coats of plaster
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Finish corners and angles and create decorative designs in finish coat, if required
• Measure, cut, fit and install drywall sheets
• Mix plaster ingredients to desired consistency
• Mould and install ornamental plaster panels, cornices and trim
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Spray acoustic or texture materials over walls and ceilings
• Tape over joints using taping machine and embed tape in compound
• Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
• Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
• Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
• Install corner beads and wire mesh around beams to which plaster is to be applied
• Install exterior and interior steel studs
• Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
• Prepare wall and ceiling layouts
• Work at heights, on scaffolding or swing stages
• Erect and install scaffolding, falsework and other working platforms

Work conditions and physical capabilities

• Bending, crouching, kneeling
• Handling heavy loads
• Manual dexterity
• Physically demanding
• Repetitive tasks
• Standing for extended periods
• Work Term : Permanent
• Work Language : English
• Hours : 38 to 44 hours per week