exterior plasterer

Education

• Secondary (high) school graduation certificate

Work site environment

• At heights
• Outdoors

Work setting

• Commercial
• Residential
• Various locations
• Willing to relocate

Tasks

• Read blueprints, drawings and specifications to determine work requirements
• Instruct apprentices
• Supervise other workers
• Apply successive coats of compound and sand seams and joints
• Apply, level and smooth coats of plaster
• Clean and prepare surfaces
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Finish corners and angles and create decorative designs in finish coat, if required
• Measure, cut, fit and install drywall sheets
• Mix plaster ingredients to desired consistency
• Mould and install ornamental plaster panels, cornices and trim
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Tape over joints using taping machine and embed tape in compound
• Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
• Attach metal or gypsum lath to studs or furring
• Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
• Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
• Install corner beads and wire mesh around beams to which plaster is to be applied
• Install exterior and interior steel studs
• Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
• Install vapour barriers and thermal and sound insulation
• Prepare wall and ceiling layouts
• Work at heights, on scaffolding or swing stages

Supervision

• 3-4 people

Security and safety

• Criminal record check

Work conditions and physical capabilities

• Bending, crouching, kneeling
• Hand-eye co-ordination
• Handling heavy loads
• Large workload
• Manual dexterity
• Physically demanding
• Repetitive tasks
• Standing for extended periods
• Tight deadlines
• Work under pressure

Weight handling

• Up to 23 kg (50 lbs)

Own tools / equipment

• Hard hat
• Mask
• Safety glasses / goggles
• Steel-toed safety boots
• Tools

Personal suitability

• Dependability
• Flexibility
• Reliability
• Team player

Experience

• 3 years to less than 5 years