HVAC Inspector (Contract)
- Contractor
Job Description
We are seeking HVAC Inspectors to support our client through site inspections in Kitimat, BC, and shop inspections / vendor surveillance in British Columbia and Alberta. The role involves inspecting industrial HVAC equipment, verifying compliance with approved drawings, specifications, inspection plans, and applicable standards, witnessing testing, and documenting inspection findings and non-conformities.
- Site inspection: Kitimat, BC | $75–$90 per hour.
- Shop inspection / vendor surveillance: British Columbia and Alberta | $55–$60 per hour.
- Start date: January 2027.
- Schedule: Intermittent assignments, when and where required, subject to project needs..
- Key requirements: CWB Level 2; AHRI or ASHRAE certification; at least five years of industrial HVAC inspection experience, including five years in quality assurance, vendor surveillance, or shop inspections.
Scope of work:
- Review approved drawings, technical specifications, ITP, QCP, applicable codes, and manufacturing procedures.
- Attend kick-off, pre-inspection meetings, witness, surveillance and hold points, as required
- Check for authenticity of materials and ensure rogue and counterfeit materials are not part of the supply
- Verify material certificates (MTRs), material grades, component identification, and traceability.
- HVAC equipment manufacturing and quality inspection.
- AHU, chiller, cooling tower, and industrial ventilation equipment inspection.
- Mechanical and electrical inspection.
- Welding and fabrication inspection.
- HVAC performance testing and FAT witnessing.
- Review of technical drawings, ITPs, specifications, and manufacturing documentation.
- Familiarity with ASHRAE, AHRI, AMCA, SMACNA, and applicable ASME/IEC standards
- Review WPS/PQR/WPQ, perform visual inspection, and verify NDE where applicable
- Inspect motors, compressors, fans, coils, filters, dampers, valves, and instrumentation.
- Verify alignment, rotating components, mounting arrangements, vibration isolation, and mechanical assembly
- Verify motors, control panels, wiring, grounding, electrical protection, and nameplates.
- Witness functional tests, airflow measurements, pressure tests, cooling/heating capacity tests, and performance verification as applicable.
- Witness Factory Acceptance Testing, operational testing, safety interlocks, alarms, and control system functionality.
- Verify identification, coating, preservation, packaging, and shipment readiness.
- Witness non-destructive testing (NDT) and interpret / verify results.
- Review test reports, inspection records, certificates, manuals, and final manufacturing data book.
- Prepare detailed reports documenting inspection results, including any issues found.
- Recording inspection results and any non-conformities
- Investigating Non-Conformities identifying causes and assisting in corrective actions.
Qualifications
- Must have CWB-Level 2
- AHRI (Air-Conditioning, Heating, and Refrigeration Institute) or ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) Certification
- Technical diploma in HVAC, Refrigeration, or Mechanical Systems
- Familiarity with AHRI / ASHRAE codes
- Relevant trade qualifications combined with substantial HVAC manufacturing and inspection experience
- Minimum of five (5) years industrial HVAC-related inspection experience at shop and / or at site
- 5 years should be in Quality Assurance / vendor surveillance / shop inspections
- Industrial experience in Oil & gas / Power & Utility / Construction / Manufacturing, etc.
Additional details:
Work schedule and hours of work: Intermittent when & where required subject to job requirement
Pay Rate (site): $75/hr. to $90/hr.
Pay Rate (Shop): $55/hr. to $60/hr.
Per diems (Shop): Expenses will be covered at cost if inspection site is beyond round trip 200 miles from Inspector place of residence and requires overnight stay at hotel (client prior approval is required)
Per diems (Site): Expenses will be covered at cost