drywall installer

• Education : Secondary (high) school graduation certificate
• Experience : 2 years to less than 3 years

Tasks

• Apply successive coats of compound and sand seams and joints
• Apply, level and smooth coats of plaster
• Clean and prepare surfaces
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Finish corners and angles and create decorative designs in finish coat, if required
• Measure, cut, fit and install drywall sheets
• Mould and install ornamental plaster panels, cornices and trim
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Tape over joints using taping machine and embed tape in compound
• Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
• Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
• Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
• Install corner beads and wire mesh around beams to which plaster is to be applied
• Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
• Prepare wall and ceiling layouts
• Work at heights, on scaffolding or swing stages
• Erect and install scaffolding, falsework and other working platforms
• Read and interpret blueprints, maps, drawings and specifications
• Work Term : Permanent
• Work Language : English
• Hours : 40 hours per week
25 days ago