Drywall Installer and Finisher Team Leader

Drywall Installer and Finisher Team Leader

Experience: 3 years to less than 5 years

On the road: Work locations may vary. Frequent or constant travel is required from the employee.

Work site environment

• At heights
• Cold/refrigerated
• Dusty
• Hot
• Noisy
• Outdoors
• Commercial
• Industrial
• Residential
• Urban area
• Various locations

Responsibilities

• Supervise other workers
• Apply successive coats of compound and sand seams and joints
• Apply, level and smooth coats of plaster
• Clean and prepare surfaces
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Measure, cut, fit and install drywall sheets
• Mix plaster ingredients to desired consistency
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Tape over joints using taping machine and embed tape in compound
• Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
• Install corner beads and wire mesh around beams to which plaster is to be applied
• Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
• Install vapour barriers and thermal and sound insulation
• Prepare wall and ceiling layouts
• Estimate costs and materials
• Work at heights, on scaffolding or swing stages

Tasks

• Apply successive coats of compound and sand seams and joints
• Apply, level and smooth coats of plaster
• Clean and prepare surfaces
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Measure, cut, fit and install drywall sheets
• Mix plaster ingredients to desired consistency
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Tape over joints using taping machine and embed tape in compound
• Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
• Install corner beads and wire mesh around beams to which plaster is to be applied
• Install metal stud framing and furring for interior drywall or plaster walls and ceilings, using hand and power tools
• Install vapour barriers and thermal and sound insulation
• Prepare wall and ceiling layouts
• Estimate costs and materials
• Work at heights, on scaffolding or swing stages

Credentials

Certificates, licences, memberships, and courses

• First Aid Certificate
• CPR Certificate
• Workplace Hazardous Materials Information System (WHMIS) Certificate

#J-18808-Ljbffr