drywall installer and finisher

Work setting

• Various locations

Tasks

• Read blueprints, drawings and specifications to determine work requirements
• Apply successive coats of compound and sand seams and joints
• Clean and prepare surfaces
• Cure freshly plastered surfaces
• Cut and install metal corner beads to protect exterior corners
• Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
• Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
• Finish corners and angles and create decorative designs in finish coat, if required
• Measure, cut, fit and install drywall sheets
• Mould and install ornamental plaster panels, cornices and trim
• Position and secure sheets to metal or wooden studs or joists
• Smooth out excess compound and allow coat to dry
• Tape over joints using taping machine and embed tape in compound
• Work Term : Permanent
• Work Language : English
• Hours : 35 hours per week