Wall and Ceiling Installer

• Measure and cut the dry wall sheets to make it fit to the wall and ceiling.
• Tighten and secure the dry wall sheets with nails on the studs using drill machine.
• Fill in the joints and corner of dry wall sheets with the compound prepared using knife.
• Tape over the joints for secure fixings using taping machine.
• Remove excess compound with the help of compound knife.
• Allow some time to dry the coat.
• Level the coat.
• Apply the compound again and dry it.
• Apply third coat if needed and dry it until you get a fine and smooth touch on the Wall Joints, edges and corners.

#J-18808-Ljbffr